This low viscosity oil was specifically designed to take advantage of, maintain and lubricate a molecularly clean surface. This oil actually keeps dirt and contaminants away from moving parts creating much less friction and significantly reducing wear. MPro7 Lubrication is significantly slicker than Teflon® based products. Rated at -40º to 650º Fahrenheit, MPro7 Lubrication will exceed every expectation. MPro7 Lubrication is a blend of oils scientifically formulated for maximum lubrication. Amazingly, it is non-toxic, non-flammable and biodegradable with no odor.

Recommended Use

After cleaning, place one or two drops of MPro7 Gun Lubrication in/on any and all moving parts such as: bolts, triggers, springs, guide rods, hammer, internal mechanisms, etc. Reassemble.

For slide rails or bolt races apply one or two drop at the beginning of each rail and cycle the firearm several times after re-assembly to distribute the oil. If you normally apply oil/protectant to the bore, place several drops on a patch and run it through the bore twice to evenly spread the oil for protection.

For rust protection on the surface areas of a firearm, apply one drop at a time and spread as thinly as possible. MPro7 Gun Lubrication is an advanced lubrication technology. Only the thinnest layer of oil is needed for protection from friction, wear, and corrosion. Plus, an extremely low evaporation rate will insure the firearm will be protected for much longer than the average gun oil.